Site Info

Saved User [close]
Harvest    Air Quality 1 - Waicol
SID:9466 HSN:12032, 13007, 10000003 USER:Guest LAST DATA: -

Started logging outside at 17:46 - 18/12/2019
HSN 13007 Main SID is: 9441
12/2/20 Changed both sensors to new enclosure design
Sensor with address 1 has the following settings:
Switched power mode, 10min readings with 6 samples (1 hour) average / peak readings, Measurement delay 1 min, cleaning cycle before every reading.
Ignore data between ~4pm and 5pm 13/2/20 I incorrectly set to wrong reading mode - Callum

James:- Graph and device settings checked and cleaned up, data will be correct as of 17/02/2020 - 11:32. Unfiltered data before this was mislabeled due to using the R0! command insted of the R1! command.

Device Settings Summary: (OLD, Before 03/07/2020 - 15:00)
Filtered (Low Power) - 1 reading every 600 Sec(10 Min) with a cleaning cycle then a 60 Sec delay between fan ON and reading, 6 data point average and peak (1 Hour)
Unfiltered (High Power) - 1 reading every 1 Sec with the fan always running, 60 data point average and peak (1 Min)

Swapped temp sensor on 12032 unfiltered to an isolated housing as reading 1.7 deg higher at 5deg - 10am 11/3/2020

03/07/2020 - 15:00:
- Changed Sensor from V1 enclosure to V2 Enclosure (High Power, 12032).
- Upgraded the code on the V1 Enclosure LPM device (13007) to V0.10 which supports multisample LPM Read.
Device Settings Summary:
Filtered (Low Power) - 1 reading every 60 Sec(1 Min, 6 samples with 1 sec delay averaged) with a 15 Sec delay between fan ON and reading, 6 data point average and peak (10 Min)
Unfiltered (High Power) - 1 reading every 1 Sec with the fan always running, 60 data point average and peak (1 Min)

2-3/12/20 - 10:00
-Updated high power board to v1.01, re-numbered to SDI-1
:(Short Avg is a 1 min rolling Average, Long Avg is a 1 Hour Rolling average )
-Swapped Low power sensirion into v2 enclosure. with updated board
-Readjusted settings and graphs.


Harvest Newsletter

News and Tips

Harvest Feed Silo Sensor
Harvest has recently developed a feed silo level sensor, so you can keep track of your level without climbing the silo.

Contact us today to enquire about getting your silos monitored.

FAQ Page
Our new FAQ Page answers common questions about soil moisture and rainfall monitoring.

My Sites
We've released a new feature which allows logged in users to view a list of all sites they have specific access to. This is particularly useful for users with sites in different regions, as all their accessible sites will be grouped together by region on the new drop down menu.

N.B. This change will not affect your ability to view existing publicly accessibly sites, rather it gives you a list based off your read-only or admin access permissions.

IBM Weather Forecast
Harvest has partnered with IBM to bring improved forecasts to the system. You will notice some changes to the layout of the forecast, and hopefully improvements to the quality of the data. As always we are keen to hear feedback on this change.

If you are interested in having a localised forecast for your site, please contact our sales team.

Soil Moisture White Paper
Our Soil Moisture White Paper has recently had a major overhaul, you can access it here. The document provides all you need to know about soil moisture, sensors and practical use of soil moisture data.

Updated Acclima Soil Sensor Installation Videos
Updated instructional installation videos for our soil moisture sensors can be found on our Support Videos Page.

Dramatic Graph Speed Increase
We have introduced a new database on our cloud server, so zooming out to week view or longer is now much faster. Try the new “30 day” view, which is often more useful than month view.

Harvest Tip #6
With the right sensors, your Harvest weather station can calculate and display the risk of Botrytis cinerea and powdery mildew.
The Bacchus model for calculating Botrytis risk was developed in NZ by Dr Balasubramaniam (Bala).
Click here for more details and other tips.

Harvest Tip #5
Data from your Harvest system can be downloaded from your webpage in text or CSV format. Click here for more details and past tips.

Earthquake Slip Monitoring
Check out this short video about some monitoring gear Harvest installed at Goose Bay, Kaikoura, NZ to monitor slips caused by the November 2016 Kaikoura 7.8 magnitude earthquake.

Annual Servicing
Annual servicing is crucial to ensure year round reliability of your system. Servicing can be carried out by a Harvest technician or by following the guidelines we have put together.
See our Product Support for guidelines.

Using Soil Moisture Readings
Harvest have recently release updated guidelines on how to use soil moisture readings. For guidelines relating to pasture click here and for vineyards/orchards click here.

Photos From Harvest System on MV Rena Finally Released
Harvest have finally released a timelapse of photos taken by a Harvest weather station during the salvage of the MV Rena. The Rena ran aground off the coast of Tauranga in 2011. Click here to see the video.

Get Tabs for Your Graphs
You can now have your data sorted into sub-categories so you can quickly view your critical data.

Check out this site to see how it works, then email us to set up your own.

Frost Fighting in 1935
Check out this gem of a news article from the July 1935 issue of the Sydney Morning Herald: News Article